X-Rite Examolite TC-440B Operation Manual page 4

Recommendations For Location Of Fixtures
There are many applications for X-Rite overhead luminaires and therefore no single installation method would be suitable for
all applications. See Figure 2 and Figure 3 for the more common installation requirements. Adjustments to the dimensions
may be needed to achieve the desired light level and area of view. Before proceeding to mount the fixture, refer to the weight
data given below and ensure that mounting supports are adequate.
On the rear of the fixture housing there are two sets of weld nuts (both standard and metric). Install the four eyebolts
(supplied) into the standard weld nuts. A chain (user-supplied) can then be hooked to the eyebolts and used to suspend the
fixture. Adjust the chain links to achieve the desired distance and angle.
Luminaire
Table
Luminaire
Luminaire
CHAIN HUNG MOUNTING PROCEDURE
Mounting luminaires should only be done by a professional carpenter.
Fixture Net Weights
Proof lite PLD (4-lamp)
Prooflite PLD (8-lamp)
Examolite TC-440B
Examolite SD-840B
Luminaire
Table
Luminaire
Figure 2.
Mounting Diagram- Top Views
CAUTION
57.5 lbs (25.87 kg)
68.0 lbs (30.6 kg)
78.0 lbs (35.1 kg)
90.0 lbs (40.5 kg)
A L
Luminaire
Table
Luminaire
Page 4
40.0 in
A L
Luminaire
48.0 in
Table
Figure 3.
Mounting Diagram- Side Views
17.0 in
22°
36.0 in