JVC LT-40FH96 Service Manual page 151

Button Functions
Power
Turns the TV on or off.
Press the P
Note:
• When you press the power button on the TV, and you are tuned to a digital channel or i.Link,
"NOW WARMING UP... PLEASE WAIT" appears on the screen. It takes a little while to warm
up.
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
1 (One)
2 (Two)
Press the T
Input
Selects the signal input source for the television: VIDEO-1, 2, 3, DIGITAL-IN or i.LINK for
video devices like VCRs, DVD players or camcorders.
Press the I
By every press of the I
Notes:
• When you return to TV mode, press the R
+/– button.
• You can also access by pressing the I
control.
• i.LINK can be selected only when you have an i.LINK device connected.
• If you have a PC connected to the TV, select VIDEO-3.
TheaterPro D6500K
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the T
62
button
OWER
button. For example, to move to channel 12:
UNE
button
UNE
button
NPUT
button, you can change the input mode.
NPUT
P button
HEATER RO
+/TV button or direct 10 key pad or C
ETURN
button on the side of the TV instead of the remote
NPUT
HANNEL