Setting The Cutting Depth; Statement Of Conformity - Parkside PAHKS 18V Manual

www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

SETTING THE CUTTING DEPTH

Please note! If possible we recommend that the cutting depth is set to 5 mm greater than the
material thickness. This should help to ensure you achieve a clean cut.
Release the wing nut on the depth adjuster
the wing nut.
SETTING THE CUTTING DISTANCE / PARALLEL GUIDE
Release the wing screw
distance and retighten the wing screw.

STATEMENT OF CONFORMITY

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby
declare that this product conforms with the following EC regulations:
Machinery Directive:
EU Low Voltage Directive:
Electromagnetic compatibility:
Description / Model type:
Bochum, 31.08.2003
Hans Kompernaß
- Managing Director -
, set the required depth on the scale and retighten
on the parallel guide
(98/37 EEC)
(73/23 EEC), (93/68 EEC)
(89/336 EEC), (93/68 EEC)
PARKSIDE CORDLESS CIRCULAR SAW PAHKS 18 V
8
, using the marking set it to the required cutting