In Exit Area - Samsung SCX-4600 Series User Manual

2. Remove the jammed paper by gently pulling it straight out.
3. Replace the toner cartridge and close the front door. Printing
automatically resumes.

In exit area

Click this link to open an animation about clearing a jam.
1. Open and close the front door. The jammed paper is automatically
ejected from the machine.
If you do not see the jammed paper, go to next step.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance when
you pull, stop and go to the next step.
3. Open the rear door.
4. Pull the pressure levers down and remove the paper.
Downloaded From ManualsPrinter.com Manuals
5. Pull the fuser cover levers down and remove the paper.
6. Return the pressure levers to their original position.
7. Close the rear door.
8. Open and close front door, printing automatically resumes.
1 Pressure lever
Troubleshooting_ 94
If you do not see the jammed paper, go to next step.
Return the fuser cover levers to their original position.
The fuser area is hot. Take care when removing paper from the
machine.