Using The Face Self-Timer - Canon PowerShot SX60 HS Getting Started

Hide thumbs Also See for PowerShot SX60 HS:
Table of Contents

Advertisement

4
Face the camera and wink.
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
If the wink is not detected, wink again slowly and deliberately.
Winking may not be detected if eyes are obscured by hair, a hat,
or glasses.
Closing and opening both eyes at once will also be detected as
a wink.
If winking is not detected, the camera will shoot about 15 seconds
later.
To change the number of shots, press the [
][
] in step 1. [Blink Detection] ( = 55) is only
after choosing [
available for the final shot.
If no one is in the shooting area when the shutter button is
pressed all the way down, the camera will shoot after a person
enters the shooting area and winks.
The zoom factor cannot be changed with the [
press the shutter button all the way down.

Using the Face Self-Timer

The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
( = 83). This is useful when including yourself in group photos or similar
shots.
] buttons
] button after you
Still Images
Movies
1
Choose [ ].
Follow steps 1 – 2 in "Specific Scenes"
( = 59) and choose [
], and then
press the [ ] button.
Press the [ ][ ] buttons to choose [
and then press the [ ] button.
2
Compose the shot and press the
shutter button halfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the shooting
area and look at the camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
],
4
P Mode
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents