Function Button Board - HP ZBook 15 G2 Mobile Workstation Maintenance And Service Manual

Function button board

Description
Function button board (includes cable and double-sided adhesive)
Before removing the function button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Hard drive (see
c. Optical drive (see
d. Keyboard (see
e. Top cover (see
Remove the function button board:
1. Detach the function button board cable from the top cover. (The function button board cable is attached
to the top cover with double-sided adhesive.)
2. Turn the top cover upside down, with the front toward you.
3. Release the function button board cable through the opening (1) in the top cover.
4. Remove the Phillips PM2.0×3.0 screw (2) that secures the function button board to the top cover.
Battery on page 44), and then remove the following components:
Service cover on page
Hard drive on page 46)
Optical drive on page
Keyboard on page 57)
Top cover on page 65)
45)
48)
Component replacement procedures
Spare part number
734284-001
71