Table of Contents
Advertisement
ACE BOILER INC.
Page 3
Operating and Installation
Instructions
(Pneumatic / Pilot-Operated)
Congratulations on your purchase of a new Ace Boiler, Packaged Storage Water Heater. In this book, we
have included installation and maintenance instructions that, if followed, will provide you with many years
of service from your new unit. Also included are instruction manuals for each of the controls furnished
with the heater. Please read them carefully. They should be helpful in both the installation and service of
this unit. Keep these instructions with the heater for future reference.
The Ace Packaged Storage Water Heater is of rugged construction, yet of simple design. The heater
uses steam (or water) from a boiler to heat domestic hot water in the tank. The storage heater's
temperature control system enables it to control the heated water within the tank at the desired
temperature. This close control is accomplished by placing the temperature control element directly in the
constant flow path of the circulated domestic water. The integral circulator constantly recirculates water
over the heat exchanger.
Lined Packaged Storage Water Heaters feature construction with rust free austenitic stainless fittings and
copper tubes for all domestic water contact surfaces, providing a high quality, low maintenance and an
extremely cost effective domestic water heating package.
The heat exchanger tubes are rolled and flared into a carbon or stainless steel tube sheet. Each storage
heater is constructed and stamped in accordance with Section VIII of the ASME Code, which is stamped
on the vessel nameplate.
Experience in the field has proven that the Ace Packaged Storage Water Heater, if properly applied and
maintained, will give many years of efficient, dependable and economical service.
Ajax Boiler Inc.
February 2006
Advertisement
Table of Contents
