Samsung AQ24A1QE Service Manual page 25

No Parts
2 Ass'y Tray Drain.
3 Electrical Parts
(Main PCB)
4 Heat Exchanger
Samsung Electronics
Procedure
1) Do "1", above.
Separate the drain hose from the extension
drain hose.
2) Take the display PCB out.
(Center of indoor unit)
3) Loosen two fixing screws of left and right
4) Pull tray drain out from the back body.
1) Do "1", "2", above
2) Take all the connector of PCB upper side out.
(Inclusion Power cord)
3) Separate the outdoor unit connection wire
from the terminal block.
4) If pulling the Main PCB up. it will be taken
out.
(Separate the TRANS hook. it before).
1) Do "1" and "2", "3", above
2) Loosen two fixing earth screws of right side.
3) Separate the connection pipe.
4) Separate the bush body at the upper side and
holder at the rearside.
5) Loosen the two fixing screws of left side.
6) Lifting the heat exchanger up a little to push
the up side for separation from the indoor
unit.
Disassembly and Reassembly
Remark
4-2