Table of Contents
Advertisement
en
•
Hold the basic unit and the bowl fi rmly
and switch on the appliance. In general,
the turbo speed is recommended for
processing food with the multi-function
accessory.
•
When you have fi nished processing,
release the On/Off switch.
•
Unplug the mains plug
Chopping inserts (15A, 15B, 15F, 15G)
Risk of injury due to sharp blade.
Pay particular attention when
handling the inserts. Note the shape and
position of the insert when inserting into
the carrier disc. Only handle the carrier
disc using the recessed handles provided.
Cutting insert - coarse (A)
Set the basic unit to the required speed
(we recommend low) for cutting: gherkins,
carrots, and potatoes.
Cutting insert - fi ne (B)
Set the basic unit to the required speed
(we recommend low) for cutting: gherkins,
carrots, beetroot, courgettes.
Grater insert - medium-fi ne (F)
Set the basic unit to the required speed
(we recommend high) for grating: apples,
carrots, cheese, white cabbage.
Grater disc insert - coarse (G)
Set the basic unit to the required speed
(we recommend high) to grate ingredients
for: dumplings, potato fritters and crunchy
salads.
Caution:
Do not process hard foods, e.g.
parmesan, chocolate, etc. using the cutter
or grater disc inserts (A, B, F or G). The
cutter, shredder and grater disc inserts
(A, B, F or G) are suitable to only a limited
extent for processing stringy food, such
as leeks, rhubarb and celery.
Preparation
Fig. D
•
Place the bowl on a smooth, clean work
surface and press down.
6
•
Place the required insert into the carrier
disc. Note the shape and position of the
insert (fi g. D-1a).
•
Place the carrier disc onto the pivot on
the base of the bowl.
•
Place the drive unit on the bowl with the
pusher inserted (align arrow a on the drive
unit with any catch b on the bowl) and turn
in an anti-clockwise direction until it clicks
into place.
Risk of injury due to sharp blade.
Never insert fi ngers into the fi lling
hole during operation. Always use the
pusher (13) to push ingredients into the
beaker.
•
Place the basic unit on the drive unit and
allow to click into place.
•
Plug in the mains plug.
•
Hold the basic unit and the bowl fi rmly
and switch on the appliance. Set the
required speed.
First switch on the appliance, set the
speed, and then place the food to be
chopped or grated in the bowl.
•
Fill the bowl with the food to be chopped
or grated.
•
Push the food to be chopped or grated
applying only light pressure on the
pusher.
Do not exert excess pressure onto
the food to be chopped or grated
(e.g. hard cheese) using the pusher
(13), otherwise the appliance may
switch off due to overload, see
»Troubleshooting«.
•
Remove the pusher and add the
ingredients through the fi lling opening.
•
When you have fi nished processing,
release the On/Off switch.
•
Unplug the mains plug
Caution:
Empty the bowl before it becomes
so full that the chopped or grated food
reaches the carrier disc.
Robert Bosch Hausgeräte GmbH
Advertisement
Table of Contents
