Mail Is Not Received Even If An Error Occurs With The Projector; Image File Names Are Not Displayed Correctly In Slideshow; Cannot Change Settings Using A Web Browser - Epson EB-485W User Manual

Problem Solving

Mail is not received even if an error occurs with the projector

Check
Is Standby Mode set to Communication On?
Did a fatal abnormality occur and the projector come to a sudden
stop?
Is power being supplied to the projector?
Is the Mail Notification function set correctly in the Configuration
menu?

Image file names are not displayed correctly in Slideshow

Check
Is the file name too long?
Are there any 2-byte characters in the file name?

Cannot change settings using a web browser

Check
Are the user ID and password correct?
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s Extended - Standby Setup - Standby Mode
When the projector comes to a sudden stop, email cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
Epson Projector Contact List
s
Check that your electrical outlet or power source is functioning correctly.
An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly.
s "Mail menu" p.111
The file name can be up to 8 characters long. For file names longer than this, the middle of the name is
omitted to shorten the name to 8 characters.
Only alphanumerical characters and symbols can be used in file names. Any other characters are replaced with
a question mark (?).
Enter "EPSONWEB" as the user ID. This cannot be changed. Enter the user ID even if the password setting is
disabled.
Enter the password you set in Web Control Password. The default password is "admin".
http://www.pureglare.com.au
Remedy
p.103
Remedy
Remedy
134