Interface - Epson EB-485W User Manual

Part Names and Functions

Interface

The following ports are available under the cable cover.
Name
A
Wireless LAN unit Install the optional Wireless LAN unit here.
installation section
s "Installing the Optional Wireless LAN Unit"
B
Audio1 port Inputs audio from equipment connected to the
Computer1 port.
• Inputs audio from equipment connected to the
C
Audio2 port
Computer2 port.
• Inputs audio from other devices when projecting
images from the device connected to the USB-A port.
D
Computer1 port Inputs image signals from a computer and component
video signals from other video sources.
E
Inputs image signals from a computer and component
Computer2 port
video signals from other video sources.
F
Outputs analog RGB signals input from the Computer1
Monitor Out port
port to an external monitor. You cannot output signals
input from other ports or component video signals.
Function
p.37
http://www.pureglare.com.au
Name
G
Connects a LAN cable to connect to a network.
LAN port
• Connects a USB memory device or a digital camera, and
H
USB-A port
projects images as a Slideshow.
s "Projecting Without a Computer (Slideshow)"
p.74
• Connects the optional Document Camera.
• Connects the projector to a computer via the supplied or
I
USB-B port
a commercially available USB cable, and projects the
images on the computer.
s "Projecting with USB Display"
• Connects the projector to a computer via the supplied or
a commercially available USB cable to use the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)"
• Connects the projector to a computer via the supplied or
a commercially available USB cable to use the Easy
Interactive Pen as a mouse or as a pen to draw on the
projected screen. (EB-485Wi/EB-480i/EB-475Wi only)
s "Operating as a mouse and drawing by
connecting to a computer (Computer Interactive)"
p.57
J
HDMI port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
s "Connecting Equipment"
K
When controlling the projector from a computer, connect
RS-232C port
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands"
L
Outputs audio from the currently projected image or the
Audio Out port
Mic port to an external speaker.
M
Power inlet Connects the power cord to the projector.
s "From Installation to Projection"
Function
p.41
p.70
g
.
p.26
p.88
p.39
12