The Remote Control Does Not Work; I Want To Change The Language For Messages And Menus; Mail Is Not Received Even If A Problem Occurs In The Projector; The Remote Control Does Not Work S - Epson EB-965 User Manual

Problem Solving

The remote control does not work

Check
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Is the remote control too far from the projector?
Is direct sunlight or strong light from fluorescent lamps shining onto
the remote receiver?
Is the correct setting for the Remote Receiver selected?
Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.

I want to change the language for messages and menus

Check
Change the Language setting.

Mail is not received even if a problem occurs in the projector

Check
Is Standby Mode set to Communication On?
Did a fatal abnormality occur and the projector come to a sudden
stop?
Is power being supplied to the projector?
Point the remote control towards the remote receiver.
s "Remote control operating range" p.20
The operating range for the remote control is about six meters.
s "Remote control operating range" p.20
Set the projector up in a location where strong light does not shine onto the remote receiver.
s Settings - Remote Receiver
p.88
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver
p.88
s "Replacing the remote control batteries"
Adjust the Language setting from the Configuration menu.
s Extended - Language
p.89
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s ECO - Standby Mode
p.99
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
Epson Projector Contact List
s
Check that your electrical outlet or power source is functioning correctly.
Remedy
p.19
Remedy
Remedy
117