Introduction To The Procon Ip Control Unit; General Description; Electrical Specifications; Revision 1.0 Dated 20 June - Procon 8450-02 Installation Manual

Ip control units, control system with ip interface
Table of Contents

Advertisement

IP Control Unit
Installation Guide

Revision 1.0 Dated 20 June 2005

1.1 General Description

The ProCon IP Control Unit allows you to connect your RS232 controlled products to an IP infrastructure and
control them from a single point using the ProCon Site Manager® software.
There are five variants of the ProCon IP Control Unit available, all of which have the following features. See
table 1.1 for a comparison chart of the differences between the variants.
DHCP or manually configured IP address, subnet mask & default gateway.
Built in e-mail server so alerts are sent even when Site Manager® software is not running.
2 available e-mail addresses for multiple alerting.
Closed loop that can trigger an e-mail alert when the loop is broken, allows hardware to act as a
security measure for expensive audio visual equipment.
2 built in timers that can trigger alerts for measuring usage, i.e. e-mail gets sent when the filter on a
projector needs changing.
Projector lamp expiration alert (uses one of the timers), sends an e-mail to notify that a projector
lamp has passed a preset duration and needs changing (requires Site Manager® software to be
running)
Infra red port for controlling non-RS232 devices such as VCR's and DVD players.
Built in scheduling that operates from the onboard clock allowing events to occur without Site
Manager® software.
Number of RS232 ports
Loop through port
Power extension port
Battery backed rtc
RS232 Interface
Closed loop interface
IR Interface

1.2 Electrical Specifications

Supply voltage
Supply current (@12V)
Power supply included
Current drawn with
8416-03 ProCon
Control Panel attached
to power loop through.
Operating temperature
Table 1.2 Electrical specifications of the IP Control Unit variants
Tel: +44 (0)1442 242 224
E-Mail: technical@procon.co.uk
1. Introduction to the IP Control Unit
8450-02
8455-02
3
1
x
x
x
x
13 pin phoenix
D9 male
13 pin phoenix
2 pin phoenix
13 pin phoenix
3.5mm jack
Table 1.1 Comparison of the IP Control Unit variants
8450-02
8455-02
12V
12V
250mA
300mA
12V 500mA
12V 500mA
375mA
375mA
0° - 70° F
0° - 70° F
- 2 -
8460-02
8465-02
3
1
x
x
13 pin phoenix
D9 male
13 pin phoenix
2 pin phoenix
13 pin phoenix
3.5mm jack
8460-02
8465-02
12V
12V
250mA
300mA
12V 500mA
12V 500mA
425mA
425mA
0° - 70° F
0° - 70° F
www.procon.co.uk
8701-03
2
x
x
3 pin phoenix
2 pin phoenix
x
8701-03
mains
X
X
X
0° - 70° F

Advertisement

Table of Contents
loading

Related Products for Procon 8450-02

This manual is also suitable for:

8455-028465-028460-028701

Table of Contents