Makita UM164D Instruction Manual page 12

Cordless grass shear
Hide thumbs Also See for UM164D:
Table of Contents

Advertisement

Shear blade maintenance
1
010971
1
010972
After operation, remove dust from both sides of the blade
with wired brush, wipe off it with a rag and then apply
enough low-viscosity oil, such as machine oil etc. and
spray-type lubricating oil.
CAUTION:
Do not wash the blades in water. Failure to do so
may cause rust or damage on the tool.
Dirt and corrosion cause excessive blade friction
and shorten the operating time per battery charge.
After use
To clean off the exterior of the tool, dampen a soft
cloth in a soapy water and wipe gently. Never use
thinner or benzine.
Do not store the tool in a place where volatile
materials are stored.
1. Hedge shear blade
2. Hedge shear blade cover
3. Storage case
011044
1. Brush
1. Machine oil
1
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Grass shear blade assembly
Grass shear blade cover
Base frame
Battery cartridge BL1013
Battery charger DC10WA
Long handle attachment
For cordless hedge trimmer use
This tool can be used as a hedge trimmer by using the
hedge shear blade (optional accessory) and 2-way
change set (optional accessory).
To use this tool as a hedge trimmer, replacing the grass
shear blades with the hedge shear blades is required.
For removing the grass shear blades, refer to the
aforementioned section titled "Installing or removing
grass shear blades". For installing the hedge shear
blades, refer to the section below titled "Installing or
removing hedge shear blades".
Hedge shear blade assembly (for Hedge Trimmer)
2-way change set consisting of the following two
accessories
Hedge shear blade cover (for Hedge Trimmer)
Storage case (for blade bottom section)
2
12
3

Advertisement

Table of Contents
loading

Table of Contents