Makita UM164D Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Lawn and Garden Equipment
  5. UM164D Series
  6. Instruction manual
Makita UM164D Instruction Manual

Makita UM164D Instruction Manual

Cordless grass shear
Hide thumbs Also See for UM164D:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Grass Shear
UM164D
010865
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita UM164D

Summary of Contents for Makita UM164D

  • Page 1 INSTRUCTION MANUAL Cordless Grass Shear UM164D 010865 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model UM164D Effective cutting width 160 mm Stroke per minute (min 1,250 Dimensions (L x W x H) 292 mm x 178 mm x 130 mm Net weight 1.1 kg Rated voltage D.C. 10.8 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
  • Page 3 moving parts. Damaged or entangled cords 19. Disconnect the plug from the power source increase the risk of electric shock. and/or the battery pack from the power tool When operating a power tool outdoors, use an before making any adjustments, changing extension cord suitable for outdoor use.

  • Page 4: Safety Instructions

    GEB070-1 Wear eye protection and stout shoes at all times while operating the machine. SAFETY INSTRUCTIONS Electrical and battery safety WARNING! IMPORTANT READ CAREFULLY all Avoid dangerous environment. Don't use the safety warnings and all instructions BEFORE USE . equipment in damp or wet locations or expose it to Failure to follow the warnings and instructions may result rain.

  • Page 5: Cutting Tools

    Switch on the motor only when the hands and feet Check loose fasteners and damaged parts such are away from the cutting tool. as cracks in the cutting attachment. Before starting make sure that the cutting tool has Follow instructions for lubricating and changing no contact with any objects.
  • Page 6 The hedge trimmer must not be used by children 20. Store the hedge trimmer with the cover on, in a dry or young persons under 18 years of age. Young room. Keep it out of reach of children. Never store persons over 16 years of age may be exempted the trimmer outdoors.

  • Page 7: Functional Description

    Tips for maintaining maximum battery life Switch action Charge the battery cartridge before completely 1. Lock-off button discharged. 2. Switch trigger Always stop tool operation and charge the battery cartridge when you notice less tool power. Never recharge a fully charged battery cartridge.
  • Page 8 Indication lamp Status Action to be taken This indicates the appropriate time to Recharge the battery replace the battery cartridge as soon as cartridge when the The lamp blinks in red possible battery power becomes low. This function works The lamp lights up in when the battery Recharge the battery red.
  • Page 9 towards the tool from the front. For specific way of removing and installing shear • To remove the blade cover, take the above installation blades refer to the reverse of a package for procedure in reverse. accessory shear blades. Installing or removing base frame 1.
  • Page 10 1. Recessed part of crank 2. Pins 3. Crank 4. Apply grease 010898 Fit the crank with its recessed part facing upwards onto the pins. At this time, apply a small amount of grease to the periphery of the crank using grease that the shear 1.

  • Page 11: Operation

    lever. Turn the tool on after adjusting the shearing height and hold it so that the foot of the tool rest on the ground. Then gently move the tool forward into the area to be cut. 010902 Press the undercover down and turn the undercover clockwise while pressing it down until the symbol 010875 the label is aligned with the symbol...
  • Page 12 ACCESSORIES CAUTION: These accessories or attachments are recommended for • use with your Makita tool specified in this manual. The use of any other accessories or attachments might 010971 present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 13 Chip receiver for hedge trimming (for Hedge • Trimmer) Installing or removing hedge shear blades CAUTION: Before installing or removing shear blades, always • be sure that the tool is switched off and the battery cartridge is removed. When replacing the shear blades, always wear •...
  • Page 14 1. Bent part of the 1. Groove in the base plate of undercover shear blades 2. Locking lever 010909 010913 Turn the shear blades upside down and install it so that At this time, make sure that the locking lever fits in the pin on the tool fit in the hole in the shear blades.
  • Page 15 OPERATION 1. Undercover Refer to the Important Safety Instructions before operation. CAUTION: Be careful not to accidentally contact a metal fence • or other hard objects while trimming. The blade will break and may cause serious injury. Also, be careful for the shear blade not to contact •...
  • Page 16 1. Trimming direction 2. Tilt the blades 3. Hedge surface to be trimmed 010880 010968 As a basic operation, tilt the blades towards the trimming Trim boxwood or rhododendron from the base toward the direction and move it calmly and slowly at the speed rate top for a nice appearance and good job.
  • Page 17 Storage 1. Hook hole 010914 The hook hole in the tool bottom is convenient for hanging the tool from a nail or screw on the wall. Put the blade cover on the shear blades so that the blades are not exposed. Store the tool out of the reach of children carefully.
  • Page 20 Makita Corporation 884947-4...

Table of Contents