BandLuxe K530 Series User Manual page 66

Appendix B: FAQ
Q: How do I configure the settings when I use xDSL to link the router?
A: 1. PPPoE: Go to the GUI Internet > Basic Setting > Ethernet
Setting. Change Connection Type to PPPoE. Enter the Username
and Password provided by your ISP. Remember to connect your
xDSL or Modem to the WAN Port on your Router.
2. Static IP: Go to the GUI Internet > Basic Setting > Ethernet
Setting. Change Connection Type to Static IP. Enter the
information in the blank provided by your ISP. Remember to
connect your xDSL or Modem to the WAN Port on your Router.
Q: Can I prevent others from using my router?
A: Yes, there are some ways to prevent others from using your router.
1. Enable your WiFi client filter.
2. Disabled your SSID Broadcast.
3. Setting your WiFi security.
Q: Where can I change the password of the router?
A: Click the menu tabs System  Administration . Enter the new
password twice (set and confirm) and click
Q: Can I backup and restore all my settings of the router?
A: Yes. Click the menu tabs System  Backup / Flash Firmware
and click
router settings as a TAR file at a desired location on your computer or
mobile device. Conversely, to restore previously saved router
settings, click
instructions to choose the previously saved TAR file; and then click
64
, then follow instructions on the screen to save
(of "Restore backup"); follow screen
.
.