BandLuxe K530 Series User Manual page 47

invalid IP address entered (e.g.
address entered becomes valid, the text color changes back to
black without
4. Filter Source Port: Enter the source port number to be filtered.
5. Click
added to the Nerwork filtering list.
In the status area, the message Unapplied Change may appear
next to "Operator Name" to indicate configuration changes stored in
the router.
6. More rules can be added to the Nerwork filtering list by repeating
Steps 1-5.
7. (a) To enable or disable an Nerwork filtering list rule, click its check
box under 'Enable'.
(b) To remove any Port Triggering rule, click its corresponding
8. To edit a particular Network filtering rule in detail, click its
corresponding
configuration page (more flexible and detailed than express settings
in Steps 1-4) will appear. After making any changes, click
Finally click
Numerical and text values shown in the illustrative examples are for
Note:
demonstration purposes only and are not for actual operation.
45
on the right (e.g.
. The Nerwork filtering rule you have just entered will be
button.
button, and the rule's associated
Using Web-based Management
(a)
to exit this configuration page.
). When the IP
).
(b)
.