Table of Contents
Advertisement
Media (Disc/SD Card/USB Memory) and Video Cassette Handling
Inserting Discs
Press [ ; OPEN/CLOSE] to open the tray.
1
– Insert a disc.
Press [ ; OPEN/CLOSE] to close the tray.
2
Notes
•
When using 8 cm DVD-RAM or 8 cm DVD-R, remove the
disc from the cartridge.
•
It is not possible to record or play continuously from one
side of a double sided disc to the other. You will need to
eject the disc and turn it over.
Automatic drive select function
[Only for discs with the write-protect tab on the cartridge
RAM
set to "PROTECT" (➔ 76, Setting Protection)]
DVD-V CD VCD
•
If the unit is recording to the HDD or stopped, it automatically
switches to the DVD drive when a disc is inserted.
•
If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
Inserting/Removing the SD Card
When the card indicator ("SD") on the unit's display is
flashing, the card is being read from or written to. Do not turn
off the unit or remove the card.
Such action may result in malfunction or loss of the card's
contents.
•
Inserting foreign objects can cause a malfunction.
Inserting the card
Press on the centre of the
card until it clicks into
place.
Insert the card label up with
the cut-off corner on the right.
Removing the card
Automatic drive select function
•
If you insert an SD card while the unit is stopped, the "SD
Card" screen is displayed. Select an item and press [OK] to
switch to the SD drive (➔ 42, 70).
•
If you remove an SD card, the HDD drive is automatically
selected.
Downloaded From Disc-Player.com Panasonic Manuals
Insert label-up.
If you are using a
e.g., miniSD
miniSD card,or a
microSD card, insert
it into the adaptor that
comes with the card.
Insert and remove this
adaptor from the unit.
1 Press on the
centre of the card.
2 Pull it straight out.
Inserting/Removing the USB memory
Inserting the USB memory
•
Before inserting any USB memory to this unit, ensure that
the data stored therein has been backed up.
•
Check the orientation of the USB connector and insert it
straight in.
•
Insert a USB device while the unit is stopped, so the "USB
device" screen is displayed. Select an item and press [OK]
to switch to the USB-related operations (➔ 42, 70).
Removing the USB memory
•
Complete all USB-related operations and pull the USB
memory straight out.
•
If a USB memory being accessed is pulled out, then the
data may be damaged.
Inserting a video cassette
Insert a video cassette.
(The surface on which you can see a roll of tape should face up.)
The unit is automatically turned on.
To eject:
From main unit
•
Press [ ; EJECT] on the main unit.
From remote control
•
Press [DRIVE SELECT] to select VHS drive and then press
and hold [ g STOP] for about 3 or more seconds.
Video Cassette Information
Video cassettes
ADAPTER
•
Break off the video cassette's tab
to prevent accidental erasure.
Cover the hole with a double
layer of adhesive tape when you
want to use the video cassette for
recording again.
•
You can use video cassettes with the VHS and S-VHS
marks, but the unit is unable to make full use of the
characteristics of S-VHS video cassettes.
Video cassette care
•
Poor quality or damaged video cassettes can cause the
heads to become dirty and malfunction. Store your video
cassettes carefully and discard them when they become
dirty or damaged.
•
Never use video cassettes on which juice has been spilled
or those that are extremely damaged since this will not only
cause the heads to become dirty, but will also make the unit
malfunction.
Tab
89
RQT9089
Advertisement
Table of Contents
