Additional Connections; Adding A Vcr: Connecting To A Television And A Video Cassette Recorder - Panasonic Diga DMR-EX98VEB Operating Instructions Manual

Additional Connections

Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➔ 50).
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup menu is set to "RGB 1 (without component)" or "RGB 2 (without component)" (➔ 83)
Make "AV2 Input" settings in the Setup menu (➔ 83).
Use of the supplied RF coaxial cable
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial cables when you connect this
unit to your Video Cassette Recorder and aerial outlet or aerial cable.
• Keep the RF coaxial cables as far away as possible from other cables.
• Do not roll up the RF coaxial cables.
HDD/DVD output and HDD/DVD/VHS output
The unit has HDD/DVD/VHS common out terminals and HDD/DVD priority out terminals.
HDD/DVD/VHS common out
• For HDD/DVD/VHS common out terminals, both HDD/DVD and VHS signals
can be output, e.g. RGB or composite video.
HDD/DVD priority out
• This is the dedicated terminal to enjoy pictures played on HDD/DVD in
higher picture quality, e.g. HDMI or component video.
• The HDD/DVD priority out terminals can also output the VHS signal.
However this is not possible during HDD/DVD recording or HDD/DVD timer
recording.
• Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
Be sure to read the Caution for AC Mains Lead on page 3.

Adding a VCR: Connecting to a Television and a Video Cassette Recorder

To household
mains socket
To household
mains socket
To household
mains socket
After completing the above connections, proceed to the TV Tuning (➔ 13).
To recording from a VCR
Refer to "Recording from an External Device" (➔ 32).
86
Downloaded From Disc-Player.com Panasonic Manuals
RQT9089
RF IN
RF coaxial cable
(supplied)
AV OUT
COMPONENT VIDEO OUT
Y P P
B R
S VIDEO
OPTICAL
AC IN
R-AUDIO-L VIDEO
DIGITAL AUDIO OUT
AV 2 (EXT)
(PCM/BITSTREAM) OUT
Rear of this unit
21-pin Scart cable
(not supplied)
AC mains lead
(supplied)
AV
RF IN RF OUT
Rear of VCR
HDD/DVD/VHS common out
AV OUT
COMPONENT VIDEO OUT
Y
OPTICAL
R-AUDIO-L
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
HDD/DVD priority out
Rear of TV
AV
To the aerial
21-pin Scart cable
(not supplied)
RF
IN
RF
OUT
AV 1 (TV)
RF coaxial cable
(supplied, black)
The RF coaxial cable cannot be
used for showing pictures from the
unit. The unit must be connected
using another method, e.g. 21-pin
Scart cable to show pictures from
the unit on the television set.
RF
IN
P B P R
S VIDEO
RF
OUT
VIDEO
AV 2 (EXT) AV 1 (TV)
OUT
Use one of the RF
coaxial cable (black
or grey) to connect
this unit's RF IN
terminal to your aerial
socket or aerial cable
(➔ 10).