Chapter 7: Using The Tv's Advanced Features; Using The Advanced Picture Settings Features; Using Srt ™ Super Upconversion; Using Dynamic Contrast - Toshiba Regza 42RV535U Owner's Manual

52RV535U_EN.book Page 56 Tuesday, July 22, 2008 5:25 PM

Chapter 7: Using the TV's advanced features

Using the advanced picture settings
features
™
Using SRT Super Upconversion
™
The SRT Super Upconversion
select the mode and adjust the levels for your desired
picture settings.
To adjust the SRT Super Upconversion settings:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
Video
Mode Sports
Picture Settings
Noise Reduction
Auto Brightness Sensor
ColorMaster
Game Mode
Theater Settings
TheaterLock
3
Highlight Advanced Picture Settings and press
T.
4
Highlight SRT Super Upconversion and press T.
5
In the Mode field, select either Off, Auto, Mode 1,
Mode 2, or Mode 3.
Mode Description
Off Sets this feature Off.
Changes the setting automatically
Auto depending on each input signal and
resolution.
For low quality content such as a
Mode 1 picture with much noise (e.g. SD
broadcasting)
For middle quality content such as a
Mode 2 picture with less noise (e.g. DVD
Video)
For high quality content such as a
Mode 3 picture with little noise (e.g. HD
broadcasting)
6
Press B or b to highlight the Level field, and then
press C or c to select either 1, 2, 3, 4, or 5.
56
™
™
feature allows you to
On
Off
Off
7
To save the new settings, highlight Done and press
T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• Some of the Advanced Picture Settings features will not be
available for adjustment when the Mode is set to AutoView.
• This feature may not work properly depending on the
content.
• The noise may appear on the image depending on the
device connected to the TV (e.g. a device with specific
enhancer function).

Using dynamic contrast

When dynamic contrast is set to Low, Middle, or High,
the TV will detect changes in the picture quality that
affect the appearance of your contrast settings and then
automatically adjust the video.
To select dynamic contrast preferences:
1
From the Video menu, highlight Picture Settings
and press T.
2
Highlight Advanced Picture Settings and press
T.
3
In the Dynamic Contrast field, select either Off,
Low, Middle or High.
4
To save the new settings, highlight Done and press
T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the following factory-set picture
modes (Sports, Standard, Movie, or PC) and then
change the dynamic contrast setting, the picture mode
automatically changes to Preference.

Using the static gamma feature

The static gamma feature allows you to adjust the levels
of black in the picture.
To adjust the static gamma settings:
1
From the Video menu, highlight Picture Settings
and press T.
2
Highlight Advanced Picture Settings and press
T.
3
In the Static Gamma field, press C or c to adjust the
static gamma.
The adjustment range is within ±5 from center.
If the setting is moved in the minus direction, the
•
detail of black colors will be decreased.
If the setting is moved in the plus direction, the
•
detail of black colors will be increased.
RV535U (E/F) Web 213:276