Using The Remote Control To Control Your Other Devices - Toshiba Regza 42RV535U Owner's Manual

52RV535U_EN.book Page 22 Tuesday, July 22, 2008 5:25 PM
Using the remote control to control
your other devices
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to operate,
you must first program the remote control to recognize
the device (if you have not already done so)
(- pages 24–26).
To use your TV remote control to operate a:
Cable converter box or satellite receiver, set the MODE
•
SELECT switch to CABLE/SAT.
VCR, set the MODE SELECT switch to AUX 1.
•
DVD player or HTIB, set the MODE SELECT switch
•
to AUX 2.
Note: Even after the TV remote control is programmed, it may
not operate certain features on any other devices. If this
happens and you wish to use those features, you will need to
use the device's original remote control.
Point the remote control
directly at the device.
16
17
18
19
22
Chapter 3: Using the remote control
1 POWER Turns the selected device on and off.
2 Channel Numbers (0-9) Press to directly access
channels (as opposed to < ,).
3 +10 Press to directly access DVD chapters higher
than 10.
4 TOP MENU Accesses a DVD's top menu.
CH Bb For channels programmed into the channel
5
memory (- page 39):
B selects the next higher channel.
b selects the next lower channel.
6 GUIDE Displays the channel guide in the CABLE/
SAT mode.
SET UP Accesses a DVD's setup menu in the AUX
mode.
7 INFO Displays TV status information on-screen.
BbC c Press to navigate DVD menus (may not work
8
on some DVD players).
ENTER Required by some satellite receivers and
9
DVD players to activate certain functions.
10 DVD CLEAR Press to reset the title and chapter
number.
11 PLAY Begins playback of a tape or DVD.
12 PAUSE Press during play or record mode to pause
the picture; press again to restart.
13 STOP Stops the tape or DVD.
14 SKIP z Skips forward to locate later DVD chapters.
15 FF Fast-forwards the tape or DVD. (Press during
play mode to view the picture moving rapidly
forward.)
16 SKIP Z Skips back to beginning of current DVD
chapter, or locates previous chapters.
17 REW Rewinds/reverses the tape or DVD. (Press
during play mode to view the picture moving
rapidly backward.)
18 TV/VCR To view one program while recording
another, press to select TV mode.
SEARCH selects a specific DVD chapter, title or
time.
19 REC Starts tape recording.
20 MODE SELECT switch Set to "TV" to control the
TV; "CABLE/SAT" to control a cable converter box
or satellite receiver; "AUX 1" to control a VCR;
"AUX 2" to control a DVD player or HTIB.
RV535U (E/F) Web 213:276