Imetec H2001 Operating Instructions Manual page 9

Weight scales
Table of Contents

Advertisement

The measurement will start automatically with the "o" signal that moves from left to right of
the LCD display (1).
After the measurement has been taken, the results will be displayed in sequence for three
times, after which the scales will turn off automatically.
The blue LEDs under the display light up to indicate the user's performance by comparing
current results with those taken during the last measurement.
If the difference between the measurements is between 0 and 1% (no significant change),
the display will show "OK".
OK
The LEDs of the new scales by Imetec will be very useful for an immediate diagnosis of
your physical condition, informing us of the possible changes in weight, fat mass, muscle
mass and percentage of water in your body.
The trend display will therefore allow to control your body balance over time.
noTE
To weigh yourself again, step off the scales and wait for the weight to disappear from the display
and and then step back on the scales.
The weight scales switches off automatically 10 seconds after being switched on.
We recommend removing the batteries if you do not intend to use the machine for a long period
of time.
review the latest data saved
Press the USERS button (3) to select the desired user.
Press the UP (6) or DOWN (5) buttons to display the latest measurement saved.
OK
OK
GB
OK
7

Advertisement

Table of Contents
loading

Table of Contents