G A L A X Y ®
A U R O U R A
C O N F I G U R A T I O N
A N D
S Y S T E M
I N T E G R A T I O N
G U I D E
Go back to the same location: Start / Programs /Stornext / Stornext client configuration
This time you can see that the MDC StorNext file system is being seen by your client since the
'snfs1' [ the name of the StorNext file system on the Aurora ] appears under ' file system'.
The final steps in the StorNext client Windows installation process requires you to assign the
Aurora's storage volume a drive letter.
Clik on the Drive letter pull down arrow:
Roll the cursor to the drive letter you want to mount the Aurora storage as on this client
station.
32
Section 2 Basic Setup