Potterton Solar Installation Manual page 12

3
Lower support batten
Attachment bracket
4
B
5
6
12 Potterton Solar - Solar Thermal Domestic Hot Water System
2.0 Installation of Solar Collector
2.5 In Roof mounting
3: Fasten attachment brackets to the lower support
batten in approximate positions shown in Fig. 4
page 10, using self tapping screws 5x40mm.
4: Set and align collector(s) on roof battens. Collector
edge should be Dimension B from tiles (see step 2c).
If using 2 or more panels, the edges of adjoining
panels should be butted together.
5: If mounting two or more collectors, connect adjoining
collectors using connector "U" adaptors supplied.
When tightening the union nuts, the collector
connection tubes must be supported using another
spanner to prevent twisting the connection tubes.
6: Fasten the collector(s) to the adjustment brackets
using self tapping screws 5x40mm.