Potterton Solar Installation Manual page 11

1
2a
Lower support batten
2b
Lower support batten
Existing tile batten
2c
Lower support batten
B
Potterton Solar - Solar Thermal Domestic Hot Water System
A
2.0 Installation of Solar Collector
2.5 In Roof mounting
1: Remove roof covering according to the collector
surface area being installed.
Width: approx 1.25m per collector + 1.5m.
Height: approx 3.0m.
2a: Attach the lower support batten using self tapping
screws supplied 5x60mm.
Note: fixing dimensions in 2b and 2c.
2b: Dimension A.
80mm for profiled tiles.
50mm for flat tiles and slates.
2c: Dimension B.
200mm or tile width + 50mm (whichever is larger).
11