LG WT5101HW Service Manual page 28

Inner
Tub Cap
4) Disassembly of Tub Cover and Pulsator
Remove 8 screws and take off the tub cover.
Remove the pulsator cap.
Remove the pulsator screws and take it out.
Remove the pulsator washer and take it out.
5) Assemble the service tool (38 mm wrench)
6) Remove the hub attachment nut. (38 mm)
Hit the bar using the hammer.
Tub Cover
Disconnect hub fixing nut and disassemble the inner tub.
28
Inner Tub Cap
Shaft
Rotor Nut Stator
Hub Attachment Nut
Hub Fixing Nut
Outer Tub
Inner Tub
Bearing Housing ASM
Rotor