Kodak DryView 8900 User Manual page 68

Operation and Maintenance
Processor schedule
control
3-38
Energy Save Schedule
6. Set the ON / OFF time by touching the Processor schedule control for
the chosen ON / OFF time to set or clear. Use the time control at the
right to adjust the times. Use the left and right arrows to select hour or
minutes. Use the up or down arrows to change the time in hours or
minutes (minutes in 15 minute increments). Touch the Set button to
update the selected time on the schedule. Touch the next processor
schedule control to choose the next ON / OFF time to set or clear.
Touch the Enable/Disable button and choose Enabled to activate this
schedule.
NOTE: We recommend you set the ON time to one hour prior to expected
imager use. This allows the processor temperature to completely
stabilize.
5E6155
Time
control
January 10, 2006