Disassembly Instructions - Mitsubishi Electric MR-C375C-W-A Service Manual

7

DISASSEMBLY INSTRUCTIONS

MR-C375C-A MR-C375CL-A
Plug out before work.
Check the automatic ice-maker by pressing ice making stop switch.
In assembling & disassembling parts use several kind of screws and rivets. Do not mistake to use them.
A
4 x12 Stainless steel
OPERATING PROCEDURE
1. Detachment Control PCB parts
Compressor cover
(1) Detach 7 pcs. of compressor cover screws behind the
refrigerator. (Photo 1)
Elect cover
(2) Detach 4 pcs. of Elect cover screws. (Photo 2)
Elect attach
(3) Disconnect the connector and remove Elect attach. (Photo 3)
PCB (Refcon assy)
(4) Remove the catch of elect attach to release the PCB plate.
(Photo 3)
Caution on assembly
[1] Firmly connect the lead wire and the connector. Ensure the
wire are not pinched.
[2] Please use the new material of sealing insulation when
re-attach.
2. Detachment Lamp cover parts
(1) Remove parts inside the refrigerator Shelf 1,2,3 shelf
Lamp cover inside the refrigerator
(1) Push up the lower catch, and pull the room light cover toward you.
(2) Detach two upper catches to take out the cover (Photo 4)
MR-C405C-A
B
4 x12 (Black) With metal washer
19
MR-C405CL-A
C
Rivet
PHOTOS
Photo 1
7 fixing screws
4 fixing screws
Photo 2
Elect cover
Photo 3 Catch
PCB
Elect attach
Catch
Catch
Photo 4
Lamp cover
Catch
D
Rivet
Compressor
cover