Section 2: Features And Operating Instructions; Turning On The System; Selecting Viewing Mode - MagniSight MSE-L24-HD Explorer HD User Manual

Turning ON the System

Turn the unit ON using the Power Switch located under the front, right
corner of the camera housing. The Lighting should illuminate the
Viewing Table.
If the Lights do not illuminate and the screen does not
turn on, please check the power cord connections
described in the previous section.
The screen should come on after a normal delay of several seconds.
If the screen does not turn ON after a few seconds, press the Monitor
Power button located in the lower right corner of the Monitor below
the screen. The Monitor settings are set at the recommended settings
so there is not need to adjust the monitor settings.
Place text or your hand under the camera to confirm the video image
displays on the monitor.

Selecting Viewing Mode

Located on the Camera Control Panel, the Mode Switch allows a choice
of Full Color HD along with selected Black & White and Select-A-Color
combinations for optimal viewing, based on your unique vision needs.
Section 2: Features & Instructions
POWER Switch
4