Imaging-side lamination is not recommended for heat-activated laminates thicker than 3 mils, when printing with pigment-based inks. Additional total
thickness and rigidity can be achieved by using thicker laminates on the non-imaging side.
†
Do not use pressure-sensitive laminates with solvent-based adhesives.
‡
For optimal durability, laminate soon after printing (within 4 hours).
§
Based on our testing experience and knowledge of these Printer / Ink combinations, we expect that KODAK Rapid-Dry Photographic Papers are compatible,
although they have not been extensively tested.
Images and graphics printed on these printers with pure black (K) ink only are more susceptible to smudging than those printed with a combination of inks
(process black). Adjust images and/or output profiles to replace pure K with process black to increase the physical durability of the print.
Note: Premium Rapid-Dry Photographic Papers are not recommended for use with dye inks unless laminated. To extend
the print lifetime, laminate within 4 hours of printing to protect from exposure to air. See Finishing section for additional