Replace Printhead - Kodak EasyShare 5300 User Manual

To clean printhead from control panel
Press Menu to display the Main Menu.
1
Press until Clean Printhead is selected.
2
Press OK to go to the Clean Printhead menu.
3
Press OK to perform a Basic Clean.
4
or
Press to select Deep Clean and press OK to perform a Deep Clean.

Replace Printhead

Make sure the EasyShare AiO is on.
1
Open the printer access door. The carriage moves to a center position.
2
Wait until the printhead is idle and silent, then pinch the pinch latch on the ink cartridge with your
3
thumb and forefinger and lift it out of the print head. Remove both ink cartridges.
Unlatch the printhead by pressing the button in the upper-left corner of the carriage.
4
User's Guide
Maintenance
75