Calibrating the Printer
3-6
Check that the Printer and Printer Setup information are correct.
20.
• If the information is not correct and you have more than one media
file, click Back and go to Step 15.
• If the information is correct, click Next to send the default table to the
printer.
NOTE: The previous table is overwritten.
The following dialog box appears.
Click Printer Status to find out more information about your printer.
21.
The following dialog box appears.
NOTE: Click Update if you want to update the information on the Printer
Status dialog box. You may need to do this if your printer is
accidentally shut off.