Use Of Receiving/Calling Records Or Telephone - Panasonic PP104078 Operating Instructions Manual

Note: To have a mobile phone conversation with use of this unit, the mobile phone shall be compatible with
the Hands-Free Profile.
Use of receiving/calling records or telephone directory (phonebook)
1
Press [BAND] at the standby state.
2
Push [SEL] (Select).
The display changes as follows:
Receiving record with no responding
The record of receiving calls (up to 5 records) that have not been taken is
displayed.
Rotation of [VOL] allows users to switch the record to be dis-
played.
Pressing [PHONE] allows users to make a call to the displayed
record.
Receiving record with conversation made
The record of receiving calls (up to 5 records) that have been taken is
displayed.
Rotation of [VOL] allows users to switch the record to be dis-
played.
Pressing [PHONE] allows users to make a call to the displayed
record.
Calling record
The calling record (up to 5 records) is displayed.
Rotation of [VOL] allows users to switch the record to be dis-
played.
Pressing [PHONE] allows users to make a call to the displayed
record.
Telephone directory
The telephone directory is displayed.
Rotation of [VOL] allows users to switch the data registered on the
telephone directory to be displayed. (up to 6 entries)
Pressing [PHONE] allows users to make a call to the displayed
data.
Pressing [BAND] allows the deletion mode to be activated to
delete the displayed data on the telephone directory. If [BAND] is
pressed again after "DEL THIS!?" appears, the currently displayed
one piece of data on the telephone directory is deleted.
Note: To use this function, the telephone directory must be imported from
Bluetooth ® mobile phone to this unit. (Refer to the below)
Telephone directory manually import mode
This unit becomes standby for importing the telephone directory from a
Bluetooth ® mobile phone. (Each time for single directory data transmission)
Operate the Bluetooth
rectory data to this unit.
Notes:
¡To use this function, the mobile phone must be compatible with the Ob-
ject Push Profile.
¡"FAIL" is displayed and the regular mode is restored if 1 minute elapses
in the "IMPORT" flashing period without importing the telephone direc-
tory from mobile phone.
® mobile phone to transmit the telephone di-
23