Remove The Stand Bracket; Remove The K-Board; Remove The S-Board; Remove The V-Board - Panasonic TC-P42GT30A Service Manual

TC-P42GT30A

8.12. Remove the Stand bracket

1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (×9
) and the Stand bracket.

8.13. Remove the K-Board

1. Remove the SP shield metal L. (See section 8.11.)
2. Remove the Stand bracket. (See section 8.12.)
3. Remove the screw (×1
4. Remove the claws (×3
5. Disconnect the connector (K1) and remove the K-Board
from the LED panel.

8.14. Remove the S-Board

1. Remove the SP shield metal L. (See section 8.11.)
2. Remove the screws (×2
3. Disconnect the connector (S10) and remove the S-Board.
).
).
).

8.15. Remove the V-Board

1. Remove the SP shield metal R. (See section 8.11.)
2. Remove the Stand bracket. (See section 8.12.)
3. Remove the screw (×1
).
4. Disconnect the connector (V14) and remove the V-Board
, ×4
from the 3D emitter panel.
8.16. Remove the Bottom cabinet
assy
1. Remove the Speakers. (See section 8.11.)
2. Remove the Stand bracket. (See section 8.12.)
3. Remove the K, S and V-Board. (See section 8.13 - 15.)
4. Remove the screws (×2
inet assy.
24
) and remove the claws (×3
) and remove the Bottom cab-