Ice Maker - Daewoo FRS(N)-U20IA Service Manual

8-6. Ice Maker

1) Disassembling Procedure
NO DISASSEMBLING PROCEDURE
1
▷ Remove 2 screws on top front of ice maker.
2
▷ Pull forward ice maker.
3
▷Unscrew Fixture of Frame Ice Maker.
4
▷Separate Ice Maker Assembly from
Frame Ice Maker.
5
▷ Separate Cover I/M (A) from Cover I/M (B)
with a (-) screw driver.
* Follow the reverse order when assembling.
NO DISASSEMBLING PROCEDURE
6
▷Remove full ice sensing switch and level switch.
7
▷Unscrew (3 points) Plate Gear Fixture.
8
▷ Check if ice dropping motor is normal (OK).
9
▷Remove 2 pin housing from Plate Gear Fixture.
10
▷ Remove I-sensor (ice sensor) from
Case Icing As.
54