D-Link DSM-G600 Installation Manual page 12

Windows Connect Now
Windows
This screen appears when the WEP or WPA
key has been assigned. Follow the directions
on the screen to transfer settings to the USB
flash drive.
Click Next.
This screen appears after the settings are
successfully transferred to the USB flash
drive. Follow the directions on the screen.
When inserting the USB flash drive into
the USB port on the DSM-G600, the USB
LED will blink slowly as it detects the USB
flash drive and then turn off. The USB LED
will then quickly blink 3 times and turn off
again. Once the USB light is solid and the
WLAN LED blinks, you may unplug the USB
flash drive.
Click Next.
When the DSM-G600 wireless setup is
successful, a window similar to this one
will appear.
Yo u h ave c o m p l e t e d t h e w i r e l e s s
configuration of the DSM-G600.
Click Finish.
Your wireless setup using WCN is now complete.
12
Connect Now (Continued)
®
DSM-G600 Install Guide
D-Link Systems, Inc.