Vidyo VidyoRoom HD-50 Getting Started page 2

VidyoConferencing System Setup
TM
The VidyoRoom Hardware
HDMI
3.
Primary Display
5.
Audio Device
Chat 150
OR
Chat 50
OR OR
Konftel 300 Konftel 300
Use only one audio device
between the above
VGA2USB (optional)
Do not power on HD-50 unit until Display(s) and Camera are fully
connected and powered on.
1. Connect Power cable.
2. Connect Ethernet cable to ETH-0 and to your
network.
3. Connect to TV using HDMI to HDMI cable on
HDMI-to-TV.
NOTE: A second screen can be connected to the VGA or the DVI
port (2 nd display is for Data Share viewing only).
4. Connect USB Webcam camera cable to an available
USB port.
5. Connect USB 2.0 SpeakerPhone cable to an available
USB 2.0 port.
VGA
Logitech HD Pro Webcam C910
(preferred)
Logitech Quickcam Orbit/
Sphere AF
Back
Front
3.
Secondary Display
(For Data Share viewing only)
2.
Ethernet
4.
Video Device
OR
For detailed webcams list
please visit Vidyo.com
1.
Power
Power Button
AUX USB port
Start Up Screens
*
Upon bootup you see the Account settings screen:
1.
Enter Portal – Arrow right, click

onscreen keyboard to enter the IP address of the
VidyoPortal that the VidyoRoom is connected to.
Enter Name — Arrow down to Name fi eld, click

and use the onscreen keyboard to enter the name of
the VidyoPortal.
Enter Password — Arrow down to the Password fi eld,

click and use the onscreen keyboard to enter the
password of the VidyoPortal.
 Scroll down to the Save button and press
your settings.
2.
 To change network settings for your VidyoRoom, arrow
down to Network. The default setting is Use DHCP.
Set to Use static IP address and specify network

settings, using the onscreen keyboard to enter
appropriate information, then scroll down and press
on the Save button.
Using the Onscreen Keyboard
In a fi eld, click to view the keyboard.

 Use up and down, left and right arrow keys
to navigate.
Click to enter a character.

Select Done to close the onscreen keyboard

* See separate VIdyoRoom User Guide and included CD-ROM for more details.
and use the
to save