Network Settings - Mitsubishi Electric XD600U User Manual

Network settings

You can set the network of the projector using the menu.
opt.
NETWORK
PROJECTOR
NAME
NETWORK
PASSWORD
IP CONFIG
PJLink
CERTIFICATION
NETWORK RESET
Setting Projector Name
1. Display the NETWORK menu. (See page 22 for menu setting.)
2. Press the or
PROJECTOR
NAME
3. Press the or
4. Press the ENTER button.
• PROJECTOR NAME screen appears.
CODE : XD600
5. Press the direction buttons to move the key cursor, select the
characters or marks to enter, and press the ENTER button.
• Projector Name can be set using up to 15 characters includ-
ing alphabets (capital/small), numeric characters, or marks.
← key:
→ key:
DEL key:
caps/CAPS key: Switching an alphabet character to CAPI-
NEXT/PREV key:Switching the marks listed on the fourth
SPACE key:
CLEAR key:
6. When selecting OK, the setting is completed as the name
stored. However, when selecting CANCEL, the setting is com-
pleted without storing.
• The display returns the NETWORK menu after selecting OK
or CANCEL.
• It may take some time to reflect the settings.
Network Password Settings
1. Display the NETWORK menu. (See page 22 for menu setting.)
2. Press the or
NETWORK
PASSWORD
3. Press the ENTER button.
• CURRENT NETWORK PASSWORD screen appears.
Downloaded From projector-manual.com Mitsubishi Manuals
SET
OK
OK
ON
OK
button to select PROJECTOR NAME.
SET
button to select SET .
v z ?%
Shifting the position of enter cursor to the
left for each character.
Shifting the position of enter cursor to the
right for each character.
Deleting the character in the position of
enter cursor for each character.
TAL or small.
line.
Inserting a space in the position of enter
cursor.
Deleting all the entered characters.
button to select NETWORK PASSWORD.
OK
4. Press the direction buttons to move the key cursor, select the
characters or marks to enter, and press the ENTER button.
• Password can be set using up to 32 characters including
alphabets (capital/small) or numeric characters.
← key:
Shifting the position of enter cursor to the
left for each character.
→ key:
Shifting the position of enter cursor to the
right for each character.
DEL key: Deleting the character in the position of
enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPI-
TAL or small.
CLEAR key: Deleting all the entered characters.
• The default password is "admin".
5. Select OK, and NEW NETWORK PASSWORD screen appears
if the entered password is correct.
• If the entered password is not correct, CURRENT NET-
WORK PASSWORD screen appears again.
6. Enter the NEW NETWORK PASSWORD and CONFIRM NET-
WORK PASSWORD.
• Password can be set using up to 32 characters including
alphabets (capital/small) or numeric characters.
← key:
Shifting the position of enter cursor to the
left for each character.
→ key:
Shifting the position of enter cursor to the
right for each character.
key: Shifting the position of enter cursor
between NEW NETWORK PASSWORD
and CONFIRM NETWORK PASSWORD.
DEL key: Deleting the character in the position of
enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPI-
TAL or small.
CLEAR key: Deleting all the entered characters.
7. When NEW NETWORK PASSWORD and CONFIRM NET-
WORK PASSWORD are matched, the setting is completed after
changing the NETWORK PASSWORD.
• If the entered content is not matched, NEW NETWORK
PASSWORD screen appears again after an error dialog is
displayed.
• It may take some time to reflect the settings.
IP Settings
1. Display the NETWORK menu. (See page 22 for menu setting.)
2. Press the or button to select IP CONFIG.
IP CONFIG
3. Press the ENTER button.
• IP CONFIG menu appears.
IP CONFIG
DHCP
IP ADDRESS 192.168.0.10
255.255.255.0
SUBNET MASK
DEFAULT
GATEWAY
xx-xx-xx-xx-xx-xx
MAC ADDRESS
OK
ON
10.132.1.1
EN-29