Mitsubishi Electric XD600U User Manual page 22

Menu operation (continued)
Basic operation
Several settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
2. Select the DETAIL MENU and press the ENTER button (or
button).
opt.
IMAGE
3. Press the or button to select INSTALLATION.
opt.
INSTALLATION
4. Press the ENTER button (or
opt.
INSTALLATION
WALL SCREEN
Menu Options
Set the following options provided in the respective menus.
1. IMAGE menu
Menu option
AUTO
PRESENTATION
COLOR ENHANCER
STANDARD
THEATER
USER
±30
CONTRAST
±30
BRIGHTNESS
COLOR TEMP. 4 options
±10
COLOR
±10
TINT
±5
SHARPNESS
ADVANCED MENU OK
NOISE REDUCTION ON/OFF
CTI ON/OFF
±5
INPUT LEVEL
OFF
CLOSED CAPTION
CC1/CC2
3D ON/OFF
3D SYNC. 1/2
• You cannot adjust TINT when the TV50 (PAL, SECAM) signal is inputted.
• You cannot adjust COLOR TEMP. when WALL SCREEN is set to other than OFF.
• When COMPUTER 1 or COMPUTER 2 or HDMI is selected, TINT do not work.
• When COLOR ENHANCER is switched, projected images may be distorted.
• Captions are not displayed while information about the menu, volume setting, or input signal selection is being displayed on the screen.
• The closed caption function displays text information included in the NTSC signal, which is mainly used for TV broadcasting in North America.
Downloaded From projector-manual.com Mitsubishi Manuals
EN-22
button).
BEIGE
Setting
Automatically sets an optimal color balance based on the input signal.
Use this setting for most cases.
Makes projected images bright and crisp.
Makes projected images look natural.
Makes projected images soft and smooth. Best suited for movies.
Adjusts the gamma curve, color intensity, or balance. (See page 27.)
Adjusts the contrast of projected images. (See page 27.)
Adjusts the brightness of projected images. (See page 27.)
Adjusts the color temperature. You cannot select this setting when
WALL SCREEN in the INSTALLATION menu is set to a setting other
than OFF. (See page 27.)
Adjusts the color tone of projected images. (See page 27.) You cannot
select this setting when the COMPUTER 1 or COMPUTER 2 or HDMI is
selected as the input source.
Adjusts the color tint of projected images. (See page 27.) You can select
this setting only when NTSC is selected as the input signal.
Adjusts the sharpness of projected images. (See page 27.)
Reduces noise of projected images when the input signal is noisy.
Corrects smeared color borders.
Adjusts the input level of analog video signals.
The input level of the video signal varies across devices to which the
projector is connected. A high input level causes projected images to
appear solid white, and a low input level causes projected images to
appear dark.
Does not display captions.
Displays captions.
Set to ON/OFF of 3D display.
Switches the order of the image for left eye and for right eye.
5. Press the or
AUTO POWER
ON
AUTO POWER
OFF
6. Press the or button to adjust the auto power off time.
AUTO POWER
ON
AUTO POWER
OFF
7. Exit the menu by pressing the MENU button several times.
Important:
• When the button doesn't function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
• After selecting the items marked with
ton.
Feature description
button to select AUTO POWER OFF.
OFF
ON
OFF
30min
, press the ENTER but-
opt.
IMAGE
COLOR
ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
ADVANCED MENU
opt.
IMAGE
ADVANCED MENU
NOISE REDUCTION
CTI
INPUT LEVEL
CLOSED CAPTION
3D
3D SYNC.
IMAGE ADVANCED menu
AUTO
0
0
STANDARD
0
0
0
OK
ON
ON
0
OFF
ON
1