D-Link mydlink DSP-W215 User Manual page 13

Section 2 - Installation
Step 9:
WPS
If you tapped WPS and pressed the WPS button on your router in the
previous step, now press the WPS button on your Smart Plug. The Status
LED will start to blink green. Allow up to two minutes to connect to your
router. Tap Next to continue.
Note: You must press the WPS button, first on your router and then on the
Smart Plug, within two minutes.
After about two minutes, the Status LED will turn solid green. This
indicates that the Smart Plug has successfully connected to your wireless
router. Tap Next to continue.
D-Link DSP-W215 User Manual 10