Timer Recording - Panasonic AG-VP310 Operating Instructions Manual

Dvd/vcr deck
Table of Contents

Advertisement

Review, Replace or Clear Program Contents:
(Recording is not in progress)
1
Press PROG
to display Program List.
2
P DT START
1
13
2:00p
2 14
7:00p
3 -- --:-- --:-- --
4 -- --:-- --:-- --
CANCEL : ADD/DLT
SELECT :
EXIT
: PROG
3
To Replace program...
P DT START
1 13
2:00p
2 14
7:00p
3 -- --:-- --:-- --
4 -- --:-- --:-- --
SELECT :
EXIT
: PROG
or
To Clear program...
P DT START
1
-- --:-- --:-- --
2 14
7:00p
3 -- --:-- --:-- --
4 -- --:-- --:-- --
SELECT :
EXIT
: PROG
4
Press PROG
to end the programming.
Notes
• If you are using a Cable Box, the VCR's channel for Timer Recording must be set to
the Cable Box input channel and Cable Box must be manually set to the desired
channel. Cable Box power must be left on.
• 2 minutes before Timer Recording is performed, "PLEASE PREPARE FOR TIMER
REC" appears and Timer Indicator flashes.
Be sure a cassette with record tab is loaded and DECK is in Stop mode.
• If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If "TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION"
appears on-screen, please re-enter the timer programs.
• If the start time for Timer Recording comes up during recording and playing back,
Timer Recording will not be performed.
• When recording programs via DSS Receiver, DSS Receiver must be left on.
• When recording programs via an antenna or cable, DSS Receiver must be turned off.
Downloaded From Disc-Player.com Panasonic Manuals
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Press
STOP
CH SPD
3:20p 02 SLP
to select number.
7:30p 10
SP
--
--
SET : SET
Repeat Step 2 (p. 24)
STOP
CH SPD
3:20p 02 SLP
to set new programs.
7:30p 10
SP
--
--
SET : SET
Press ADD/DLT.
STOP
CH SPD
--
7:30p 10
SP
--
--
SET : SET
Important notes when using DSS Receiver
To cancel a Timer
Recording in progress...
Hold down STOP in VCR mode for
a few seconds to cancel the Timer
Recording.
(The "TIMER" Indicator goes out
on Multi Function Display.)
• Any future daily or weekly recording
will be performed as programmed.

Advertisement

Table of Contents
loading

Table of Contents