Timer Recording - Panasonic PV-D4762 Operating Instructions Manual

Timer Recording

Ready Checklist
All connections are made (pp. 12 ~ 15).
TV and DECK are plugged in.
Clock set correctly.
Tape has rec.tab. (p. 6)
Remote is in VCR mode. (Press VCR.)
Sufficient tape remaining for rec time.
1
Press PROG*
to display Program.
2
DATE START STOP CH
13 SUN --:-- --:-- --
TODAY SLP
- - - - - - - - -- - - - - - - -- - - - - - -
SELE CT START DATE SE
SELECT :
SET : SET
END : PROG
Example
Today
31 1
14 12
DAILY
WEEKLY
SELECT /
13
(SUN)
Selection Order
WEEKLY
(MON)
WEEKLY
(SAT)
3
DT START STOP CH SPD
13 10 : 00 P 12 : 00 P 02 SP
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
CANCEL : ADD / DLT
SELECT 1-8 :
ENTER : SET
EXIT : PROG
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
24
PV-D4762 P1-25 (2nd) [LSQT0525B].p65
1) To set record DATE,
press to select:
1~31= one time, or
DAILY= MON~ FRI, or
WEEKLY= same time
each week and
press SET.
• See selection order left.
2) To set remaining items,
press
to select and
press SET
to set START/ STOP times,
CH(channel) or LINE input
(p. 39), and tape speed
(SP, LP, SLP).
Press PROG
to end programming.
To Enter More Programs,
press
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.
• The "Timer" Indicator lights up on DECK.
• You can do Timer Recording with the power on or off.
• "TIMER REC WILL START SOON" appears on-screen for 2 minutes
before Timer Recording starts. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode indicator and
"REC" will flash on Multi function Display.
24
POWER
ADD/DLT
PROG
SELECT
SET
VCR mode Indicator
Multi Function Display
VCR Hi-Fi TIMER
VCR
•
A
VCR REC M
•
VCR REC Indicator TIMER Indicator
2002/05/23, 18:20
DVD
•
ANGLE
•