Setting up your picture frame
Buttons and controls
back
menu
OK
Connecting the power cable
www.kodak.com/go/support
All buttons and controls described in this guide (for
example: press
unless otherwise noted.
1 Plug in the power cable.
Your power cable (included with the frame) may be
different from the one pictured. Use the plug that
accommodates your type of power outlet.
2 Pull out and extend the stand on the frame back
and place the frame on a flat, stable surface.
NOTE: Your frame is set up to display in landscape orientation
You can turn it to portrait
setting. Press Home
→
options
Frame orientation. See
Getting started
) are on the remote control
but you must also change the
, Settings
page
17.
.
→
Viewing
4