Picture Quality Problems - Kodak Z740 User Manual

If...
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device

Picture quality problems

If...
Picture is too dark
or underexposed
Picture is too light
Picture is not clear
www.kodak.com/go/support
Try one or more of the following
■
Click the Help button in the EasyShare software.
■
Adjust the camera Video Out setting (NTSC or PAL,
page 31).
■
Make sure the external device settings are correct (see the
device's user's guide).
Try one or more of the following
■
Reposition camera for more available light.
■
Use Fill flash (page
behind the subject.
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■
Adjust exposure compensation
■
Reposition camera to reduce the amount of available light.
■
Turn flash off (page
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■
Use P mode to adjust the Exposure.
■
To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■
Clean the lens (page
■
Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■
Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
22) or change your position so light is not
(page 9).
(page 33).
22).
(page 9).
55).
Troubleshooting
43