Changing The Slide Show Display Interval; Running A Continuous Slide Show Loop; Displaying Pictures And Videos On A Television - Kodak Z740 User Manual

Changing the slide show display interval

The default interval setting displays each picture for 5 seconds. You can set the
display interval from 3 to 60 seconds.
1 On the Slide Show menu, press
OK button.
2 Select a display interval.
To scroll through the seconds quickly, press and hold
3 Press the OK button.
The interval setting remains until you change it.

Running a continuous slide show loop

When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
button.
2 Press to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted. The Loop feature remains until you change it.

Displaying pictures and videos on a television

You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Image quality on a television screen may
not be as good as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see
stops if you connect or disconnect the cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera A/V Out/USB
port to the television video-in port (yellow) and audio-in port (white). See
your television user's guide for details.
2 Review pictures and videos on the television.
www.kodak.com/go/support
Doing more with your camera
to highlight Interval, then press the
to highlight Loop, then press the OK
page
.
31). The slide show
21