Setup Tips - FrontRow To Go User Manual

setup tips

IMPORTANT!
Be sure you place your FrontRow To Go speaker and transmitter units on their charger
overnight – for a minimum of 12 hours – before turning the power on and/or using them
for the first time. Failing to do so can reduce battery capacity.
Basic setup tips
First – Identify a front corner of the room – the location from where the teacher
normally teaches.
Second – Take a good look around, paying close
attention to power outlet and other electronic
equipment locations. Ideally, the speaker should
be placed at a 5-foot distance from other elec-
tronic equipment, such as computers or radios.
Third – Determine whether to mount the
speaker on the wall as shown in diagram 1, or
place it on a sturdy surface using the T-bar table
3
diagram 1