Panasonic CQ-VD5505U Operating Instructions Manual page 35

Input Select
AV1/AV2 input selection
AV1
(AV1 input selection)
AV1 : an external device is connected to AV1.
Skip : skips AV1.
AV2
(AV2 input selection)
AV2 : an external device is connected to AV2.
TV : TV tuner is connected to AV2.
Skip : skips AV2.
Camera
(Rear view camera set up)
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. (
Instructions)
On : connected to the CAMERA IN
Off : unconnected
Note:
¡Make sure to select
Off
connected.
¡The image from the rear view camera may be blurred
in the night or a dark place.
Memory Clear
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
Yes : clears the memory to default settings
No : no memory clear.
The display returns to the previous one.
default:
AV1
default:
AV2
Installation
a
default:
Off
when no rear view camera is
: proceed.
OK
Cancel : no memory clear.
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
Other
Other settings
(Setting ACC selection ON and
ACC Select
OFF)
On
: sets to ON if your car has ACC position.
Off
: sets to OFF if your car has no ACC posi-
tion.
Note:
¡For an ACC-equipped car, select ON. The following
functions are available.
¡The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
Off
main unit through the remote control.
Caution
¡Be sure to select off when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
OFF
ACC
IGN
appears when
Really?
is selected.
Yes
default:
On
CQ-VD5505U
34
35