Sony CDX-GT780UI Installation/Connections page 2

1


1 2
1 8 2
m m
5 3 m
m

Claws
A
TOYOTA

max. size
5 × 8 mm
( / × / in)
7 11
32 32
to dashboard/center console
Bracket
Bracket
Existing parts supplied with your car
A
Downloaded from Caradio-Manual.com Manuals
2
Face the hook inwards.



3
Dashboard


B
NISSAN

max. size
5 × 8 mm
( / / in)
7 × 11
32 32
to dashboard/center console

max. size Bracket
5 × 8 mm
( 7 / × 11 / in)
32 32
Bracket
Existing parts supplied with your car
B
Precautions
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a safe
and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection collar

and the bracket
Before installing the unit, remove the protection
collar  and the bracket  from the unit.
1
Remove the protection collar .
Pinch both edges of the protection collar
pull it out.
2
Remove the bracket .
 Insert both release keys  together between
the unit and the bracket  until they click.
 Pull down the bracket
 , then pull up the unit
to separate
Mounting example
Installation in the dashboard
Notes
Fire wall
• Bend these claws outward for a tight fit, if necessary (-2).
• Make sure that the 4 catches on the protection collar  are
properly engaged in the slots of the unit (-3).
Mounting the unit in a Japanese
car

You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws .


max. size
5 × 8 mm
( / / in)
7 × 11
32 32
How to detach and attach the
front panel
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press .
Press , then slide the front panel to the right, and
gently pull out the left end of the front panel.
-B To attach
Place the hole  of the front panel onto the spindle 
on the unit, then lightly push the left side in.
Warning if your car's ignition
has no ACC position
Be sure to set the Auto Off function. For details, see the
 , then
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
 until the display disappears each time you turn
the ignition off.
RESET button
When the installation and connections are completed,
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.