Audiopipe APMR-2002 Owner's Manual page 9

English
FREQ (Hz)
80
100
125
150
200
NOTE: Chart values based on 4 Ohm speakers.
Figure 6
The marine amplifier can be configured for a mixed-mode operation. The table provides
component values to create a 6dB per octave crossover at specified frequencies. Use
components that have a +5% tolerance and capacitors rated at 100V.
NOTE: Choose the same frequency for both LP and HP crossovers. Do not overlap
frequencies, as this may damage the marine amplifier.
Mixed-Mode Satellite and Subwoofer System
(Set INPUT SELECT Switch to STEREO)
L (mH) C (uF)
8.0 497
6.4 398
5.1 318
4.2 265
3.2 199
- 7 -