If...
Picture is too light
Picture is not clear
www.kodak.com/go/support
Try one or more of the following
■
Reposition camera to reduce the amount of available light.
■
Turn flash off
(page
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the AF/AE indicator turns
green, press the Shutter button completely down to take
the picture.
■
Use P mode to adjust the Exposure and Flash Compensations
(page
22).
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the AF/AE indicator turns
green, press the Shutter button completely down to take
the picture.
■
Clean the lens
(page
■
Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■
Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
23).
(page
23).
83).
Troubleshooting
71